Photographs,if shown,may reflect homeowner modifications
HDC-1502-1 - The Oak Hollow
|Living Sq. Ft:||1502 sq. ft.||Floors||1|
|Bedrooms:||3||Width||61 ft. - 8 in.|
|Baths:||2||Depth||45 ft. - 8 in.|
Slab /Crawlspace /Basement
|Traditional / Ranch / Cape Cod / Versatile|
As low as: $950.00
Customer Reviews of this House Design:
We constantly receive compliments about how beautiful the home is...|
I went online and found your house plans and loved them! We were looking to build something a little smaller, than the house we previously had, as we were moving from the gulf coast up to north Mississippi. When I found this plan, it was perfect for us. We constantly receive compliments about how beautiful the home is and how the floorplan is so well laid-out and utilizes every square inch of space. I really enjoyed building the home, and would recommend House Plan Gallery, wholeheartedly, to anyone looking for a beautiful, well-designed, and affordable home design...
This uniquely designed house has both beauty and great function. It is simple to build, yet has created curb appeal by the use of contrasting building materials, color, overlapping planes, shades and shadows. The master suite is large for a house of this size with jet tub, walk-in shower, walk-in closet, compartmented toilet, and dual lavatories. A large storage/shop and an exterior storage area is a plus for us who always need more storage. The kitchen is spacious and has a raised bar for conversation with friends, and a pantry. A small office/study/playroom is a quite useful flexible space. The great room has gas logs, plenty of light and views to the rear, a foyer, and a coat closet for your guests. This is a split bedroom plan with open living spaces we feel is a unique value in design.
|House Plan Features:|
Please note that in most areas of the country, these house plans will be everything you need to build, but not necessarily everything you need to obtain a building permit.
In addition to the house plans you order, you may also need a site plan that shows where the house is going to be located on the property. You might also need beams sized to accommodate roof loads specific to your region. Your home builder can usually help you with this. You may also need a septic design unless your lot is served by a sanitary sewer system. Many areas now have area-specific energy codes that also have to be followed. This normally involves filling out a simple form providing documentation that your house plans are in compliance.
In some regions, there is a second step you will need to take to insure your house plans are in compliance with local codes. Some areas of North America have very strict engineering requirements. Examples of this would be earthquake-prone areas of California and the Pacific Coast, hurricane risk areas of the Florida, Gulf & Carolina Coasts. New York, New Jersey, Nevada, and parts of Illinois require review by a local professional as well. If you are building in these areas, it is most likely you will need to hire a state licensed structural engineer to analyze the design and provide additional drawings and calculations required by your building department. If you arenít sure, building departments typically have a handout they will give you listing all of the items they require to submit for and obtain a building permit.
Additionally, stock plans do not have a professional stamp attached. If your building department requires one, they will only accept a stamp from a professional licensed in the state where you plan to build. In this case, you will need to take your house plans to a local engineer or architect for review and stamping. In addition, plans which are used to construct homes in Nevada are required to be drawn by a licensed Nevada architect.