Photographs,if shown,may reflect homeowner modifications
HDC-2390A-33 - Woodson
| Living Sq. Ft: | 2390 sq. ft. | Floors | 1 |
| Bedrooms: | 4 | Width | 40 ft. - 0 in. |
| Baths: | 2 | Depth | 61 ft. - 0 in. |
|
Available Foundations: |
|||
| Architectural Styles: | |||
| Traditional | |||
As low as: $935.00
Customer Testimonials:
"Dear Friends,
We got in early this morning to start sending the plans out for bidding and after reviewing the most recent modifications of HPG-19192-1, we felt we truly needed to take the time to write you this letter.
Your team has been such a pleasure to work with and we are blown away with the excellence and thoroughness of the work that has been done. The specs on how we want our concrete done, the span of lumber charts, the details on the cabinets, etc., is unbelievable. Your plans are the true example of excellence. That is so rarely seen anymore in residential work or even commercial work anymore! Hold your heads up and puff up those chests – share the love and kind words throughout your staff.
Thanks again!"
Tim and Debbie Cribb
Developers, Lakeside at Cross Creek, Camdenton, MO.
The HDC-2390A-33 features a very livable floorplan layout that can grow with your family's needs. In addition, this unique home plan includes many of the most-popular home amenities and is quite affordable to build, wherever you live. You really can't lose with the HDC-2390A-33, since before you even build, you'll already have saved thousands by choosing a high-quality stock house plan over a fully-custom home design.
Like this plan, but its not exactly what you're looking for?
Check out these similar plan(s):
Front Elevation:
1st Floor Plan:
| House Plan Features: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
HDC-2390A-33 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Specifications: | Square Footage: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| House Plan Pricing: | |||||||||||
|
|
||||||||||
Important Information:
Please note that in most areas of the country, these house plans will be everything you need to build, but not necessarily everything you need to obtain a building permit.
In addition to the house plans you order, you may also need a site plan that shows where the house is going to be located on the property. You might also need beams sized to accommodate roof loads specific to your region. Your home builder can usually help you with this. You may also need a septic design unless your lot is served by a sanitary sewer system. Many areas now have area-specific energy codes that also have to be followed. This normally involves filling out a simple form providing documentation that your house plans are in compliance.
In some regions, there is a second step you will need to take to insure your house plans are in compliance with local codes. Some areas of North America have very strict engineering requirements. Examples of this would be earthquake-prone areas of California and the Pacific Coast, hurricane risk areas of the Florida, Gulf & Carolina Coasts. New York, New Jersey, Nevada, and parts of Illinois require review by a local professional as well. If you are building in these areas, it is most likely you will need to hire a state licensed structural engineer to analyze the design and provide additional drawings and calculations required by your building department. If you aren’t sure, building departments typically have a handout they will give you listing all of the items they require to submit for and obtain a building permit.
Additionally, stock plans do not have a professional stamp attached. If your building department requires one, they will only accept a stamp from a professional licensed in the state where you plan to build. In this case, you will need to take your house plans to a local engineer or architect for review and stamping. In addition, plans which are used to construct homes in Nevada are required to be drawn by a licensed Nevada architect.
Please note that in most areas of the country, these house plans will be everything you need to build, but not necessarily everything you need to obtain a building permit.
In addition to the house plans you order, you may also need a site plan that shows where the house is going to be located on the property. You might also need beams sized to accommodate roof loads specific to your region. Your home builder can usually help you with this. You may also need a septic design unless your lot is served by a sanitary sewer system. Many areas now have area-specific energy codes that also have to be followed. This normally involves filling out a simple form providing documentation that your house plans are in compliance.
In some regions, there is a second step you will need to take to insure your house plans are in compliance with local codes. Some areas of North America have very strict engineering requirements. Examples of this would be earthquake-prone areas of California and the Pacific Coast, hurricane risk areas of the Florida, Gulf & Carolina Coasts. New York, New Jersey, Nevada, and parts of Illinois require review by a local professional as well. If you are building in these areas, it is most likely you will need to hire a state licensed structural engineer to analyze the design and provide additional drawings and calculations required by your building department. If you aren’t sure, building departments typically have a handout they will give you listing all of the items they require to submit for and obtain a building permit.
Additionally, stock plans do not have a professional stamp attached. If your building department requires one, they will only accept a stamp from a professional licensed in the state where you plan to build. In this case, you will need to take your house plans to a local engineer or architect for review and stamping. In addition, plans which are used to construct homes in Nevada are required to be drawn by a licensed Nevada architect.
